BFNJM - CG-408 CLASS A

Product Identification

Product ID:CG-408 CLASS A
MSDS Date:01/01/1987
FSC:8030
NIIN:00-753-5008
MSDS Number: BFNJM

Responsible Party
GOAL CHEMICAL SEALANTS CORP.

Emergency Phone: (213)269-0461

Cage: 04011

Contractor
GOAL CHEMICAL SEALANTS CORP
LOS ANGELES, CA 90023-4206 US

Telephone: 213-269-0461

Cage: 04011

Ingredients

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 31.2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192


POLYSULFIDE

Fraction By Weight: 56.2%


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 12.6%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


THIRAM (SARA III)

CAS: 137-26-8

RTECS: JO1400000

Fraction By Weight: 0.2%

OSHA PEL 5 MG/M3

ACGIH TLV: 1 MG/M3; 9192

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


MANGANESE DIOXIDE (AS MANGANESE)

CAS: 1313-13-9

RTECS: OP0350000

OSHA PEL C,5 MG/M3/1 FUME TWA

ACGIH TLV: 5 MG/M3 DUST/1 FUME

Hazards

Effects of Overexposure:MAY CAUSE EYE OR SKIN IRRITATION OR DIZZINESS

First Aid

First Aid:FLUSH AFFECTED EYE W/WATER & CONSULT MD. WASH AFTER EACH USE
W/SOAP & WATER.

Fire Fighting

Flash Point:170F OC
Extinguishing Media:CO*2, H*2O. ETC.
Fire Fighting Procedures:NO SPECIAL PROCEDURES
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS

Accidental Release

Spill Release Procedures:GENERAL CLEAN-UP, SCRAPE UP EXCESS MATERIAL,
CLEAN RESIDUE W/SOLVENT

Handling

Handling and Storage Precautions:STORE BELOW 80F.

Exposure Controls

Respiratory Protection:RECOMMENDED-SOLVENT VAPORS. USE NIOSH/MSHA
APPRVD RESP DEVICE
Ventilation:MFR RECM LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:NO SPECIAL EQUIP. BESIDES ABOVE
Supplemental Safety and Health
THE DRYING TIME VARIES FROM 1/2 HR. TO 2 HRS. DEPENDING ON THE AMT OF
MNO*2 ADDED TO THE PRODUCT.

Chemical Properties

HCC:V4
Appearance and Odor:LIGHT TO DARK GRAY WHEN MIXED; MERCAPTAN

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMP. ABOVE 300F
Hazardous Decomposition Products:SULFUR COMPOUNDS, SO*2 GASES ETC.
Conditions to Avoid Polymerization:TEMP. ABOVE 300F

Disposal

Waste Disposal Methods:MFR RECM GENERAL TRASH DISPOSAL. DISPOSE IAW
FED., STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.